Atlas Asanbar ArshTechnical & EngineeringAtlas Asanbar Arsh

Home and villa

Villa / home elevator

A villa elevator — often sold as a homelift or home elevator — is for a private house, duplex, or villa, not a shared apartment shaft. In Iran those labels usually overlap; measure the shaft before you compare package names. Atlas Asanbar Arsh designs and installs in Tehran, Karaj, and cities across northern Iran.

Villa elevator in a private-house lobby — stainless landing doors and cabin at ground floor
2–4 stops
Typical travel range
Compact footprint
Tight shaft and landing
Calm ride
Private, quieter travel

System anatomy

What is a villa elevator and how does it work?

In the Iran market a homelift is not a separate legal class. A quote may say villa elevator, homelift, or home elevator and mean the same two- or three-stop house. The real difference usually sits in shaft size, capacity, door type, and whether shaft steel and install are inside the figure — not in the package name.

Villa elevator hoistway during install: home cabin, pit below the lowest stop, and the drive beside the shaft
  1. 01

    Shaft and pit

    We measure shaft width and depth, pit, and overhead on site. A homelift is not always pitless; jack type and drive follow the survey.

  2. 02

    Drive system

    On low-rise villas hydraulic is the common pick — a guide, not a rule. If travel is taller or oil is a problem, we look at traction or MRL.

  3. 03

    Home cabin

    Cabin finish usually matters more in a private house than in a shared apartment — but it still has to fit the shaft. Catalog or custom, after measuring.

  4. 04

    Doors and landing

    Hinged or automatic doors and landing width change the install. In a finished villa the landing is sometimes tight; the survey shows that.

  5. 05

    Power and service

    Some jobs run on single-phase house power; others need three-phase. We check service access to the power unit or controller on the same visit.

First we see the shaft, pit, overhead, and landing. Some models use a shallow pit; a direct jack wants a deeper one. Do not take “pitless” as a rule for every homelift. A platform lift without a cabin is not a homelift — if people ride it, the car and the inspection path count separately.

You pick the cabin separately from the drive — catalog or custom. A warm villa finish looks good, but if the shaft is tight we measure first. The quote comes after the site visit; stops, drive, cabin, and shaft condition move the number.

Elevator design consultation

Use cases

Which homes suit a villa elevator?

A homelift fits a house that is yours, where nobody expects a multi-unit lift. A three-level villa, a duplex around Karaj, a triplex with a tight landing — those are usually the jobs.

Stainless villa elevator landing doors in a house hallway with wood floor

Villas and detached houses

A villa elevator for a detached low-stop house — calm travel and a cabin that matches the interior.

Home elevator inserted into the stair landing of a duplex

Duplex and compact space

When the landing is tight or the shaft sits in the stair, we size a compact homelift after measuring — not with a promise to fit every house.

Hydraulic power unit in a small villa room beside the shaft: oil tank, motor, and hose

Hydraulic on low-rise

Power unit beside the shaft, at grade, or in the basement — the usual low-rise villa pattern when a pitched roof will not take a machine room.

Inside a home elevator cabin with warm wall finish and car operating panel

Home cabin finish

Cabin design and materials from catalog or custom; it has to fit the shaft first, then you pick the photo.

If several households share one shaft, do not push this system — an apartment residential lift is the better fit. We also do not promise an install in every older villa; structure and landing decide.

An honest picture

Villa elevator advantages and limits

Villa gear fits when the house is yours, stops are few, and the shaft or landing will not take a full apartment lift. A calm ride and a cabin that matches the interior matter here.

Advantages

  • Fits a private house

    Built for duplexes, triplexes, and low-stop villas. Capacity and speed match family traffic, not a shared apartment peak.

  • Quieter, calmer travel

    In a private house you usually want less noise and a gentler start-stop than a busy apartment lift — especially with low-rise hydraulic.

  • A cabin that matches the house

    Cabin materials and design usually rank higher in a villa than on a shared landing. It still has to fit the shaft; a catalog photo does not replace a tape measure.

  • Hydraulic is common on low-rise

    For a two- to four-stop villa, hydraulic with a power unit beside the shaft is the usual market pattern. A pitched roof does not want a classic machine room — a guide, not a rule for every villa.

Limits

  • Not for a shared apartment

    A homelift will not serve multi-unit traffic. If several households share one shaft, see the apartment residential page.

  • Height range is a guide

    Typically 2–4 stops. A taller or busier house may lean toward traction or MRL. Do not lock a floor cap from a brochure.

  • A homelift is not always pitless

    Some models use a shallow pit; some do not. Do not treat a sales-table centimetre as a law for every job — measure on site.

  • A cabinless lift is not a homelift

    Do not mix a platform without a cabin with a people elevator. If people ride it, a certificate still matters — the homelift label does not exempt you.

Better to name the limits in the first meeting. If several units share one shaft, leave this page. Do not make hydraulic mandatory for every villa; height, pit, and oil change the call. And do not take “no permit needed” from a salesperson — moving people in a private house still has an inspection path.

Hydraulic vs traction guide

Choosing a use

Villa / homelift or apartment elevator — which page is yours?

If you have a private house, duplex, or villa with few stops, a villa elevator is the serious option. If several units share one shaft and daily traffic matters, go to the apartment residential page — keep the two search intents apart.

Use and traffic

Villa / homelift

Private house; family traffic

Apartment elevator

Shared multi-unit; daily peak

Stops

Villa / homelift

Typically 2–4 stops

Apartment elevator

Set by floors and units

Shaft and pit

Villa / homelift

Compact; check the pit on site

Apartment elevator

Building shaft with clearer overhead

Cabin

Villa / homelift

Finish usually ranks higher

Apartment elevator

Durability and capacity for shared use

Read the table against your house, not against which name is “better.” A three-stop villa in Lavasan or around Karaj almost always belongs on this page. The same shell with several units and a shared lift tips toward apartment residential. Do not treat homelift and residential as one keyword.

View apartment elevators

Project path

From survey to villa elevator handover

A villa install does not start with picking the homelift label. First we see the shaft, pit, landing, power, and where the power unit or controller can sit. Without those measurements, two quotes cannot be compared.

Installation service details
  1. 01

    Survey and space measurement

    Shaft, pit, overhead, landing, and power survey, then drive type — before the package name.

  2. 02

    Design and quote

    Execution drawings, cabin and drive selection, and a transparent quote with separate lines: equipment, steelwork, install, certificate.

  3. 03

    Supply and installation

    Rails, doors, and cabin install; drive and control wiring per approved drawings.

  4. 04

    Testing and handover

    Safety tests, leveling adjustment, inspection prep, and owner handover briefing.

After the survey, drawings and a phased quote follow: design, supply, install, handover. Exact timing depends on shaft readiness and equipment lead time. After testing we also coordinate the technical inspection. Handover means the lift works and inspection paperwork is moving — not just a cabin on rails.

How quotes are built

How is villa elevator pricing calculated?

There is no fixed villa-elevator price, and we do not put a verified public range on this page. Two three-stop villas can get very different quotes; usually one is equipment only, the other has mixed in install and shaft steel.

Stops and travel
Stop count and travel height change jack length or whether traction enters the job.
Drive type
Hydraulic, traction, or MRL — depends on height, pit, roof, and whether oil is a problem.
Capacity and cabin size
Family traffic sets capacity; size comes only from the shaft and that cabin’s catalog — not from a market-wide rule.
Cabin and doors
Cabin materials, glass or custom design, and hinged versus automatic doors move the quote directly.
Shaft, pit, and steelwork
Existing versus new shaft, pit prep, and steelwork often sit outside the equipment figure.
Quote scope and certificate
Ask whether install, landing doors, delivery, and the inspection path sit in the same figure or apart. Accurate quotes only after a survey.

We write the number after the survey. Fuller factors — including what a quote includes — sit in the home-elevator price guide. If you only heard a lump sum, ask whether shaft, landing doors, and the certificate are inside it.

Request site visit and quote

Project proof

Home and villa projects

A few jobs that sit in private houses and villas — not shared apartments. Open a card for the details of each job.

View all

Common villa elevator and homelift questions

Before a site visit the same questions come back: what a homelift is, how it differs from an apartment lift, how many floors, hydraulic or traction, whether a pit is required, certificate, and price. Short answers are here; numbers and drawings come after the shaft is measured.

What is a homelift?

In the Iran market homelift, villa elevator, and home elevator are often used interchangeably — they are not three separate legal classes. It usually means a cabin lift for a private low-stop house. A platform without a cabin is not a homelift. The practical difference is space and package items, not the label on the quote.

How does a villa elevator differ from an apartment lift?

Villa gear is for a private house and family traffic; apartment gear is for a shared shaft and daily multi-unit peak. A homelift is usually lower capacity and speed, with tighter space. Do not merge the two search intents — residential is a separate page.

How many floors suit a villa elevator?

Typically 2–4 stops (duplex through a low-rise villa). That is a guide, not a hard cap for every house. Taller travel or busier use makes traction or MRL more serious.

Is hydraulic or traction better for a villa?

On low-rise work hydraulic is the common market pattern, not a rule for every villa. If travel is taller, the roof has no room, or oil is a problem, look at traction or MRL. MRL is not the same as hydraulic. Detail sits in the hydraulic-versus-traction guide.

Does a homelift need a pit?

Not always, and not never. Many models use a shallow pit; a direct jack usually wants a deeper one. Do not take “pitless” as a rule for every homelift — we answer after measuring the shaft.

Does a home elevator need a certificate?

If it moves people, the homelift label alone does not exempt you. In Iran market sources a certificate is still raised for home elevators. Process detail is in the certificate article; do not accept “usually no permit needed.”

How much does a villa elevator cost?

There is no fixed price. It depends on drive, stops, capacity and cabin, doors, component brands, and shaft condition. Two “full homelift” quotes may include equipment only in one of them. Atlas Asanbar Arsh writes a transparent quote after survey. Fuller factors sit in the home-elevator price guide.

Related resources

Villa elevator guides and related services

Once villa use is clear, continue from here to installation, home-elevator pricing, the hydraulic-versus-traction guide, or cabin selection.

Project consultation in the lobby

Ready for a consultation?

Call now for pricing and technical advice.