9 specifications
Passenger cabin with Natural maple veneer center walls, brushed aluminum trim, cream travertine floor, and bright 3000K LED lighting — suited for residential, office, and commercial buildings.
This passenger cabin is listed with clear platform, capacity, and finish specs. Align size and capacity with shaft, doors, and motor. Quote-based pricing—code 9530.
Assembly view
Exploded layout of visible cabin parts — tap the image to view full size.
Material specification
Finish materials in this cabin configuration — commercially available elevator interior products with documented specifications.
| # | Component | Qty | Specification |
|---|---|---|---|
| 1 | Maple veneer wall panels (center band) Vertical cladding on back wall center and COP wall | 2 | Natural maple veneer on E1-grade MDF substrate
Standard: EN 81-70 · fire class per local code |
| 2 | Brushed aluminum wall panels Side walls and back wall flanking panels | 4 | Brushed aluminum sheet, #4 satin brushed
Standard: AISI 304 class · anti-fingerprint optional |
| 3 | Vertical LED panel reveals Indirect warm accent between maple and aluminum panels | 4 | Aluminum channel with LED strip
Standard: 24V DC · IP20 inside car |
| 4 | Car ceiling with light panel Car canopy with general diffuse illumination | 1 | Steel frame with opal PMMA diffuser and LED board
Standard: EN 81-20 emergency lighting zone clearance |
| 5 | Ceiling perimeter trim Decorative transition between canopy and walls | 1 | Powder-coated aluminum trim extrusion
Standard: RAL 9011 class |
| 6 | Travertine car floor panel Passenger standing surface | 1 | Polished natural travertine slab
Standard: Slip resistance per local code · sealed for maintenance |
| 7 | Car Operating Panel (COP) Floor selection, door open/close, alarm | 1 | Gloss black glass touch panel with TFT display
Standard: EN 81-70 button height · braille optional |
| 8 | Returned handrail Passenger support at 810 mm AFF (32 in) | 1 | Maple oval handrail
Standard: EN 81-70 handrail requirement · returned ends anti-snag |
| 9 | Entrance frame assembly Structural trim around car door opening | 1 | 1.5 mm cold-rolled steel frame
Standard: RAL 9011 · fire-rated assembly per door package |
Maple veneer wall panels (center band)
Vertical cladding on back wall center and COP wall
Natural maple veneer on E1-grade MDF substrate
Standard: EN 81-70 · fire class per local code
Brushed aluminum wall panels
Side walls and back wall flanking panels
Brushed aluminum sheet, #4 satin brushed
Standard: AISI 304 class · anti-fingerprint optional
Vertical LED panel reveals
Indirect warm accent between maple and aluminum panels
Aluminum channel with LED strip
Standard: 24V DC · IP20 inside car
Car ceiling with light panel
Car canopy with general diffuse illumination
Steel frame with opal PMMA diffuser and LED board
Standard: EN 81-20 emergency lighting zone clearance
Ceiling perimeter trim
Decorative transition between canopy and walls
Powder-coated aluminum trim extrusion
Standard: RAL 9011 class
Travertine car floor panel
Passenger standing surface
Polished natural travertine slab
Standard: Slip resistance per local code · sealed for maintenance
Car Operating Panel (COP)
Floor selection, door open/close, alarm
Gloss black glass touch panel with TFT display
Standard: EN 81-70 button height · braille optional
Returned handrail
Passenger support at 810 mm AFF (32 in)
Maple oval handrail
Standard: EN 81-70 handrail requirement · returned ends anti-snag
Entrance frame assembly
Structural trim around car door opening
1.5 mm cold-rolled steel frame
Standard: RAL 9011 · fire-rated assembly per door package
Vertical cladding on back wall center and COP wall
Material
Natural maple veneer on E1-grade MDF substrate
Standard: EN 81-70 · fire class per local code
Side walls and back wall flanking panels
Material
Brushed aluminum sheet, #4 satin brushed
Standard: AISI 304 class · anti-fingerprint optional
Related products
Explore other components in this category with comparable specifications
Cabin
Cabin
Cabin
